NETS Trailer Leasing & Sales
NETS TRAILER LEASING & SALES
TK Reefer Motor.jpg

Refrigerated

 

➤ FEATURES & UPGRADES

OPTIMIZED TO BE THE MOST RELIABLE, EFFICIENT, AND LONGEST LASTING TRAILERS ON THE ROAD, NETS FLEET SPEC TRAILERS ARE BUILT TO SAVE YOU TIME AND MONEY BY MAKING YOUR JOB EASIER. WE USE THE BEST COMPONENTS FROM TOP MANUFACTURERS LIKE HYUNDAI, HENDRICKSON, STEMCO, JOST, AND MORE. SEE FOR YOURSELF WHAT SETS NETS APART.

NETS Reefers2.jpg

THERMO KING PRECENDENT C-600

The C-600 offers outstanding efficiency and reliability paired with superior temperature control. The Precedent platform represents the very latest in transport refrigeration technology, but it’s backed by something that can only be built up slowly over time: Thermo King peace-of-mind. The C-600 is equipped with the SMART REEFER SR-4 Controller, 2-Speed Evaporator, Microchannel Condesnser, Smart Condenser Fans, CargoWatch, ServiceWatch, and more. It is also EPA and CARB Compliant.

20190214_150036.jpg

FULL LENGTH EXTERNAL RUB RAILS

Constructed of high strength aluminum, the full length external rub rails protect the trailers exterior sidewall surfaces against moderate abrasion and impact damages. The rub rail is designed to take the impact forces of a small mistake that could have potentially cost you much more. This small addition can make a huge impact on repair bills by helping to avoid the costly replacement of top rails, bottom rails, and/or composite side plates. Tapered fade away plugs are used at both ends of the rail to create a snag-free surface.

Interior3.jpg

ENHANCED INTERIOR DESIGN

The interior of our reefer trailers has been given the same attention to detail as the rest of the trailer. The injection foamed urethane insulation is 2” thick at the sides, floor and roof, 3” thick at the rear door and 4” thick at the front wall. We use a heavy duty flat floor design to make loading and unloading quicker and easier, especially when using dollies. Four floor drains/weep holes provide a reliable passage for unwanted moisture to escape. The Polar X liner features a 22” high integral scuff liner for added protection.


 
HKANT40k-HXL7-UBL-bolt_001_5-17-13_Trans.png

HENDRICKSON AIR RIDE SUSPENSION

Optimized for dry freight and refrigerated sliding tandems, VANTRAAX HKANT 40K with a capacity rating of 40,000 pounds, remains one of the lightest air suspension systems on the market. At the same time, it addresses the critical needs for a superb ride, rugged durability and low maintenance. Featuring LDA (Large Diameter Axles) and heavy duty parallel spindles for increased roll stiffness, reduced weight, and improved durability, the VANTRAAX helps haulers boost payloads and enhance fuel efficiency. It also features Hendrickson’s SURELOK and QUIK-DRAW systems.

TIREMAAX_PRO_assembly_wTire_10-16-2014_Flat.png

TIREMAAX PRO PSI MONITORING SYSTEM

TIREMAAX PRO, an automatic tire pressure control system that is capable of actively inflating or relieving the tires to a preset pressure level. Its straightforward mechanical design balances tire pressure at every wheel position by continuously monitoring and adjusting tire pressure based on changing environmental conditions - an important feature for achieving maximum tread life in any tire configuration. This system also features a warning light mounted on the driver side radius panel that will alert the driver of a potential tire problem before it turns into a much bigger issue.

SURELOK.png

SURELOK ANTI DOCK WALK SYSTEM

Maintains deck height and eliminates horizontal movement of the trailer, known as dock walk, during loading & unloading. SURELOK features two locking legs that provide maximum engagement with the suspension beam. A robust return spring enhances durability and a metal flange at the bottom of each leg ensures proper positioning. The supports are automatically engaged when the trailer’s parking brakes are set. When the parking brake is released, SURELOK’s support legs automatically retract. No driver interaction required.


 
Coupler.jpg

ENHANCED EXTERIOR

The exterior structure and features of our refrigerated trailers are designed to protect the valuable cargo and stand up to years of use. Our main side posts are placed on 16” centers, rather than the industry standard 24” centers, while the coupler and support gear posts are placed on 12” centers. We have also added an Owner Operator Package consisting of 5 lights, recessed into the top rails.

REINFORCED APPROACH AND Coupler PLATES

The approach and upper coupler plates are subjected to high levels of stress during normal use. We have added a high strength striker angle over the heavy duty stainless steel approach plate to better deflect the fifth wheel plate under the trailers. We have also replaced the industry standard 1/4” coupler plate with a high strength 5/16” plate to increase durability over the life of the trailer.

LandingGear-Angle.jpg

HEAVY DUTY LANDING GEAR

The Jost Magnum A450 heavy duty landing gear has a lift capacity of 62,500 pounds and is equipped with a two speed maintenance free internal gearbox. The solid wing plate and additional crossmember supports add additional strength. Exterior side posts have been placed on 12” centers from the support gear area to the front of the trailer for further reinforcement of the structure.

 

➤ CONFIGURATIONS

 
  • 53’ Reefer Trailers

  • 48’ Reefer Trailers

  • 45’ Reefer Trailers

  • 42’ Reefer Trailers

  • 28’ Reefer Trailers

  • 53’ Multi-Temp Reefers

  • 48’ Multi-Temp Reefers

  • 45’ Multi-Temp Reefers

  • 42’ Multi-Temp Reefers

  • 28’ Multi-Temp Reefers

  • Liftgate Reefer Trailers

  • Liftgate Multi-Temp Reefers

  • Electric Reefer Trailers

  • Multi-Door Reefers